John Deere Original Equipment Pressed Flange - H152916

John Deere Original Equipment Pressed Flange - H152916

4-Hole Square Trimmed Flanged Bearing Housing 

Part Specifications: Spherical Diameter (IN) 2.4409
BC Diameter (IN) 3.7992
See Sketch (IN) 5.0000
Hole Size (IN) 0.4055
Thickness (IN) 0.0984
Trim Size (IN) 6.5787
Standout (IN) 0.3386
Material (ALPHA) A4-2
Finish (ALPHA) B-Zinc-Electro Plated
Note (I) Combination - Round and Square Bolt Holes

Fits the following John Deere models:
Combine: 9400, 9410, 9450, 9500SH, 9500, 9510, SH9510, 9550SH, 9550, 9560SH, 9560, 9560STS, 9570 STS, 9600, 9610, 9650CTS, 9650, 9650 STS, 9750STS, 9660CTS, 9660, 9660STS, 9760STS, 9750STS, 9860STS, 9860STS, 9880i STS Hillmaster, ATU 200, ATU 300, ATC250, S550, S660, S670HM, S690, S7 600, S7 700, S7 800, S7 900, T560, W540, 9640WTS, 9640iWTS, 9660WTS, 9660iWTS, 9680WTS, 9680iWTS, 9670 STS, 9770 STS, 9780CTS, 9780i CTS, 9870 STS, C670, S650, S660, S670, S680, S680HM, S690, S690HM, S760, S770, S780, S785, S790, T550, T560, T660, T670, W540, W550, W650, W660.

This is an O.E.M. John Deere part.