John Deere Original Equipment Ball Bearing - JD9434

John Deere Original Equipment Ball Bearing - JD9434

Part Specifications: 
Inside Dimension (MM) 38.1000
Outside Dimension (MM) 80.0000
Width Outer Race (MM) 22.0000
Width Inner Race (MM) 42.9000
Dynamic Rating (N) 32500.0000
Static Rating (N) 19800.0000
Inner Corner Radius (MM) 0.4000
Note (F) Seal - Both Sides

Fits the following John Deere models: 
Platform Windrower: 415D, 420D, 425D, 430D.
Combine: 4420, 6620, 6622, 7720, 7721, 8820, 9400, 9410, 9450, 9500SH, 9500, 9501, 9510, SH9510, 9550SH, 9550, 9560SH, 9560, 9600, 9610, 9650CTS, 9650, 9660CTS, 9660, T560, W540, 9640WTS, 9640i WTS, 9660WTS, 9660i WTS, 9680WTS, 9680iWTS, 9780CTS, 9780iCTS, C670, T5 400, T5 500, T5 600, T5 700, T550, T560, T6 500, T6 600, T6 700, T6 800, T660, T670, W540, W550, W650, W660.
Cotton Picker: 7260, 9935, 9970, 9940, 9950, 9960, 9965, 9970.
Cotton Stripper: 7455, 7460, 748.
Conditioner Mower: 1214, 1380, 1424.
Stack Mover: 200, 300.
Feeder Shredder: 230.

This is an O.E.M. John Deere part.